Categories
» Cameras
Pair Tapco Mackie S-5 Active Studio Monitors Speaker S5
Item #V00628698058000010001
OUT OF STOCK
Get alerted when this item comes back in stock!
Pair of Tapco by Mackie S-5 Active Studio Monitors Speakers S5
Units are in good cosmetic condition.
Units come with power cord.
Units pulled from working environment.
Units power on and produce a signal.
Model Number S-5
Product Info:
|
Acoustic Performance
Free Field Frequency Response: +64 Hz 20 kHz (±3 dB) Lower Cutoff Frequency: +3 dB @ 64 Hz Upper Cutoff Frequency: +3 dB @ 22 kHz Sound Pressure Level @ 1 meter, 7.5 dBu into Balanced Input: 100 dB SPL @ 1m Maximum SPL Per Pair: 113 dB SPL @ 1m |
||||
|
Transducers
Low Frequency: 5.25 in/133 mm with steel frame, polypropylene cone woofer High Frequency: Wave guide loaded 1 in/25 mm silk dome tweeter |
||||
|
Amplifiers
Low Frequency Power: 60 watts, 4 ohm load, 100 watts peak High Frequency Power: 60 watts, 4 ohm load, 100 watts peak Slew Rate: > 15 V/µs Distortion (THD, SMPTE IMD, DIM 100): < 0.035% Signal-to-Noise Ratio: Low Frequency: > 101 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms High Frequency: > 93 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms Type: Monolithic IC, Class AB |
||||
|
Electronic Crossover
Crossover Type: 24 dB/octave Crossover Frequency: 4 kHz Sensitivity: +4 dBu at 300 Hz for full output Input Impedance: 20 kO, balanced bridging; 10 kO unbalanced |
||||
|
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 65 Hz, peaking High Frequency EQ: ±2 dB @ 5 kHz, shelving |
||||
Please feel free to contact us if you have additional questions about this item.